Helios™ PEEK 2005 is a unique composite material developed by Roboze to increase the mechanical, thermal and surface finish characteristics of PEEK printed parts. Reinforced with chopped fibers of ceramic, it accelerates the time-to-market thanks to a reduction in post processing times of over 60% compared to other super polymers and composites.
Roboze CARBON PEEK is considered the highest performing 3D printing super polymer in the entire industry. To the well-known characteristics of PEEK, it adds greater thermal stability and stiffness. The addition of carbon fibers dramatically increases the mechanical properties of the component produced, eliminating the gap with traditional manufacturing techniques.
Roboze PEEK is a semi-crystalline super polymer that combines excellent mechanical characteristics with incredible thermal and chemical resistance properties, used in extreme applications where electrical insulation, high wear resistance and low coefficient of friction are also required.
Roboze Carbon PA is undoubtedly one of the 3D printing materials with the highest mechanical performance. This is a carbon fiber reinforced polyamide. It is ideal for mechanical applications and, due to its high tensile modulus, is the perfect candidate for replacing light metal alloys.
Polyetherimide falls into the category of high performance technopolymers as it has very particular chemical-physical characteristics that include resistance to hydrolysis and acid solutions, advanced thermal performance maintaining high operating temperatures, and therefore, the ability to withstand repeated cycles in an autoclave, plus mechanical properties of absolute importance. Certified for aerospace.
ULTEM ™ is a registered trademark of SABIC or its affiliates.
Roboze PEKK (polyetherketoneketone) is an optimized formulation that allows you to easily print super-performing parts, characterized by flame retardant properties, high thermo-mechanical properties combined with excellent chemical resistance. It is UL 94 V-0 classified.
Roboze ToolingX CF is a carbon fiber reinforced thermoplastic composite material. It is lightweight and has exceptional thermal stability, chemical resistance, and is inherently self-extinguishing.
PP, polypropylene, is the most widely used commodity polymer, especially in applications for everyday objects and automotive components - thanks to its characteristics of high resistance to shocks, abrasion, chemical agents and excellent electrical insulating properties.
Flex-TPU is a thermoplastic polyurethane. A material with characteristics of flexibility, used for multiple applications such as gaskets, anti-vibration mounts or sheaths. Compared to other elastomers, ROBOZE FLEX TPU guarantees a higher continuous use temperature (248°F/120 ° C), greater chemical resistance, with good resistance to UV rays, wear, abrasion and impact.
LEXAN ™ EXL AMHI240F is a polycarbonate copolymer characterized by high impact resistance and ductility even at low temperatures (down to -86°F/-30 ° C) developed for extreme applications in the aerospace, consumer goods and automotive sectors.Compliance with the UL94 V-0 flammability standard at 3.0 mm also makes it suitable for applications requiring flame resistance.LEXAN ™ is a registered trademark of SABIC or its affiliates.
Resistant to mechanical loads, FUNCTIONAL-Nylon cannot be easily attacked by organic compounds due to its chemical resistance. The high tenacity together with the resistance to aging make this material perfect for the metalworking sector.
Roboze Strong-ABS is a stabilized ABS blend with excellent mechanical properties. Recommended for prototyping and production of functional components, also subjected to mechanical tests.
ABS-ESD is a polymer produced with ABS loaded with carbon nanotubes, therefore conductive. The result is a filament with excellent printing characteristics and superb ESD properties designed for use in critical applications that require protection from electrostatic discharge.
Electrical resistivity: 107 to 109 Ω
Roboze ULTRA-PLA filament is a technical material for high definition components. Composed of a blend of loaded PLA, it is ideal for printing prototypes and small series that need definition and surface quality.
Subscribe to our newsletter and keep up with all the latest news