Ramp up your performance!

Roboze One Xtreme

Regenerated Beltless System

Revolutionary Roboze axes movement increases its performance

New rack and pinion treatment

The Beltless System increases its performance thanks to a nickel-plating treatment created ad hoc to increase printing precision and mechanical tolerances.

Increased productivity at Increased speed

Xtreme solutions are designed to enhance the work of manufacturing companies.
The new Beltless System increases the print speed by 20% compared to the Desktop series, bringing Roboze One Xtreme Printing speed at 157.5 in/min (4000 mm/min).

Resistance to friction and to wear

The new treatment reduces the friction coefficient between the rack and pinion, while reducing the risk of premature wear, increasing the useful life of the movement of the axes

Even more precise

Never-before-seen Precision on FFF 3D printing systems

0.6µ inch Mechatronic precision

The new Beltless System works with less friction to increase the mechatronic accuracy of the axes compared to the Desktop series.

Repeatability Guarantee

Roboze’s revolutionary movement of the axes has always been synonymous with repeatability and high accuracy. The new Xtreme series exceeds himself with guaranteed repeatability of the molded parts at 0.6µ inch (0.015mm).

Buildplate autolevelling

The buildplate autolevelling on the Xtreme systems guarantees more repeatability of the printed parts, while accelerating the pre-printing procedures.

Advanced control system

Melting point between mechatronics and materials engineering

Direct feedback for tolerance control

Xtreme systems have advanced encoders able to provide immediate feedback on movement tolerance, correcting errors automatically. The repeatability of Roboze prints is practical, real and leaves nothing to chance.

Less maintenance work

The new Beltless System treatment has added touch-less endstops inserted for rapid movement control, thus reducing the mechanical problems of the axes, reducing maintenance interventions.

Support System Cabinet

The Support System Cabinet is an integrated support cabinet that allows for the storage of spools to preserve them from atmospheric agents. In addition to the Vacuum Box for vacuum generation, it os also housed the Roboze Filament Dryer, designed and produced by R&D team to dry the filaments before printing very easily and automatically.

Vacuum technology

Enhance production time management for the benefit of produced part quality

Vacuum System

Roboze One Xtreme presents a blank floor surface to ensure perfect flatness and adhesion of the parts during the printing process and reduces machine management operations between prints.

Increased productivity

For part adhesion Roboze uses polymeric dedicated accessories that share the same chemical-physical properties of the extruded materials. With this system the film change occurs within seconds, to further optimize the production processes of end users.

Heated surface up to 212 °F (100 °C)

The bedplate of Roboze One Xtreme, with a volume of 11.8 x 9.8 x 7.9 in [300 x 250 x 200 mm] (xyz), is able to reach 212 °F (100 °C) guaranteeing thermal stability and adhesion.

Xtreme materials for functional tests and finished parts

COMPOSITE MATERIALS

Versatiliy and strenght with 4 high performance composite materials: CARBON PA, GLASS PA and ABS-ESD to meet the most extreme needs.

TECHNICAL MATERIALS

ULTRA-PLA, STRONG-ABS, FUNCTIONAL-NYLON to support functional tests and small production batches.

COMMODITY POLYMERS

PP is the most used commodity polymer, thanks to the high resistance against impact, abrasion and its excellent electrical insulating properties. It is now available on a 3D printing solution.